Controlador solar 12V/24V 10A Regulador solar PWM Cargador de batería Pantalla LCD Salida USB dual 5VFeatures:1. Large LCD display can display charging status, battery status, load status, complete 3-stage PWM charging management, high charging efficiency, and effective battery protection.2. Dual USB output, output 5V 2.1A battery. Equipped with 5 types of protection, the system control parameters are adjustable, and the setting and operation are simple and convenient. Built-in short circuit protection, overcurrent protection, reverse connection protection, overload protection, open circuit protection; the controller automatically recovers when the fault is removed.3. Various states are displayed intuitively. When the solar panel is charging, the arrow between the panel icon and the battery icon will flash quickly. When the battery is fully charged, it will flash slowly and stop charging. The function of the solar charge controller is to protect the voltage from overcharging and discharging. Can be used to charge DC lamps and mobile phones (please connect the positive and negative poles correctly and ensure that all terminals are tightly connected.)4. Controller size: 133*70*33mm; Rated voltage: 12V/24V; Rated current: 10A; Maximum voltage: 12V battery up to 25V, 24V battery up to 50V;5. The use of a larger area PCB has stronger overcurrent capacity and better heat dissipation; using 5 high-quality MOS tubes for control, with stronger overcurrent capacity, stable performance, longer life, and higher charging efficiency.Specifications:Name: LCD screen solar controllerRated current: 10AOutput voltage: DC 12V/24VDisplay: LCD screenSelf-consumption: less than 10mAOvercharge protection: 14.4V/28.8VOvercharge floating charge: 13.7V/27.4VCharge recovery voltage: 12.6V/25.2VOver discharge protection: 10.7V/21.4VOver discharge recovery: 12.6V/25.2VDual USB output: 5V/2A (can charge mobile phones, iPads, etc.)Working temperature: -35 degrees Celsius-60 degrees CelsiusController size: 133*70*33mmWeight: 130gNotes:Solar panel voltage corresponding to system selection12V-23V panel corresponds to 12V battery24V-40V panel corresponds to 24V batteryParameter settings:12.0V lead-acid battery corresponds to:Float charge voltage set to: 13.6Recovery discharge voltage set to: 12.6Discharge cut-off voltage set to: 10.712.8V lithium iron phosphate battery corresponds to:Float charge voltage set to: 14.6Recovery discharge voltage set to: 13.6Discharge cut-off voltage set to: 11.011.1V lithium battery corresponds to:Float charge voltage set to: 12.6Recovery discharge voltage set to: 11.6Discharge cut-off voltage set to: 9.6Notes:Due to different display and lighting effects, the actual color of the product may be slightly different from the color shown on the picture.Due to manual measurement, please allow a measurement deviation of 1-3mm. Thank you for your understanding!Packing list:1 solar panel controller1 user manual