[Durable dent remover kit]Automotive dent removers are made of high-quality alloy and plastic materials. They do not break when subjected to typical pressure ranges. Each paintless dent repair kit is made of unique durable material that is strong and durable for long life.[Effective Dent Repair]Equipped with all the necessary equipment to repair dents of any size or shape. For large dents, a T-bar puller can be used, and for small and medium dents, a bridge puller and gold dent puller respectively should be used.[Ergonomic design]The dent repair kit uses the ergonomic design of the lever. The unique arched bridge of the dent puller bridge allows the user to turn the knob quickly and efficiently to best fit the dent and adjust the spacing.[Widely Used]The dent repair tool kit can be used on a variety of vehicles, including cars, SUVs, and motorcycles. It's also perfect for a variety of surfaces, including metal and plastic.Product Information:Net Weight: 1.6kg/setSize: 40cm*10cm*12cmProduct ListThe package includes: 1 dent remover, 1 T-bar remover, 1 gold dent lifter, 3 suction cups, 1 metal pen (with 8 heads), 1 rubber mallet, 37 adhesive tabs, 1 hot melt glue gun, 10 glue sticks, 1 empty bottle, 2 yellow plastic blades with instruction manual in English or Spanish, 1 tool bag.*Usage Steps and Suggestions:1. Wipe the surface with a clean, damp cloth to avoid excess dust, which can cause the glue to adhere poorly.2. Connect the power supply and preheat the glue for 5-10 minutes.3. Choose the right repair part according to the size of the dent, and then apply hot glue to the sheet metal (Attention! The glue needs to be a little more), immediately place the veneer in the center of the dent and press until it sticks (if it peels off easily, add a layer of glue on top of the veneer).4. Let the glue cool for 8 to 10 minutes. Allow it to cool and solidify before moving on to the next step to prevent the iron from falling out.5. Once the glue has cooled, align and press the extractor with the T-extractor and slowly pull several times. Repeat until the dent is gone. (ATTENTION! It's easy to break the spring or rip the paint off the car if you use too much force. Be careful to avoid unnecessary damage.)6. After repairing the dent, use a plastic putty knife moistened with 95% alcohol to remove any debris from the body surface.NOTE: If the dent is large, you will need to use a horizontal tool to repair it.It is very difficult to use just one tool. A large dent can take a long time to repair.