Features:Latest Laser Beam Shaping Technology:S9 uses the latest 5.5W laser beam shaping technology diode laser, it has an ultra-fine 0.06mm sharp laser focus, with super cutting penetration and precision, can cut up to 15mm thick wood, 10mm acrylic, carve ceramics and stainless steel.Fast Focusing Design:Combines a fixed focus lens and a sliding design. You only need to slide the laser and tighten the screws to complete the focusing. This makes it very easy to use.Solid & Easy Assembly Structure:The full-metal structure design makes the machine work stably, and improves the engraving accuracy. The assembly can be completed in 10-20 minutes. The structural frame is very durable and available to upgrade. During use,Wide Compatibility:The machine is compatible with various mature engraving software, such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows system, switch system (LightBurn), and engraving file format Support JPG, PNG, DXF, SVG, G-code, NC, BMP, etc.Safe Design:The laser filter cover filters 98% of the ultraviolet light to the eyes. And comes with a A4 size steel pad to protect the table from laser damage. Isolate fire hazards.8.Square measuring ruler: X-axis and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects quickly. The 410x420mm large-area engraving interval can meet your various engraving needs.Specifications:Model: SCULPFUN S9Engraving Size: 410*420mmEngraving Materials: Wood, paper, cardboard, plastic, white, PCB board, aluminum oxide, 304 Stainless steel, ceramic, dark stoneCutting Material: Wood, acrylic, cardboard, fabric, bamboo, plastic board, KT boardMachine Electricity Power: 30W (It has nothing to do with cutting or engraving performance, just electricity consumes)Diode Laser Power: 5.5-6W Laser Wave Length 455 plus or minus 5nmEngraving Accuracy: 0.01mmFocusing Method: Fixed focus laser + sliding deviceLaser Protective Cover: The light filter cover on the laser protects the user's eyes and prevents animals grabing the laser spot.Operating Software: Compatible with LaserGRBL, LightBurn, Benbox, GrblController, LiteFire,etc.Operation System: Compatible with switch system. Supported file formats NC, BMP, JPG, PNG, DXF and other image formats.Data Transmission Method: USB connectionPower Supply: International universal standard power input: 100-240V AC, 50/60HZ output: 12V 5AMachine Weight: 3.0kg/ 6.61lbsPackage Weight: 4.4kg/ 9.7lbsPackage Size: 59 x 34 x 12cm/23.3 x 13.3 x 4.7in Note:For detailed machine instructions, please refer to the manual for parameter settings.When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles. Please do not touch the laser emitter with your hand, or it may burn your hand. Please avoid strong impact on the machine. Children under 14 are not allowed to use this product and children over 14 need adult supervision. The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.Package List:1* X axis assembly2* X shaft2* Y shaft2 x Belt1* Control box module set3* Support feet1* Laser module set1* Power Supply1* USB cable1* Tool Kit1* Goggles1* 10x10cm wood chip 3mm thickness1* 10x10cm wood chip 10mm thickness1* A4 size steel desktop protection pad